Brand:  JUCHUANG
Model:  JC-600
 
Digital temperature controller JC-600
 
Specifications
Temperature controller(Celsius/Fahrenheit degrees) 
Temperature control 
Parameter sets and value storing 
 
temperature controller
·Temperature display (Celsius/Fahrenheit degrees)
·Temperature control
·Parameter sets and value storing
·Compressor re-start delay
·Parameter locking
·The factory default resumption
·Offset on sensor temperature ·Self testing
·Power supply12V50/60Hz ·Power consumpotio n5W
·Output relay for compressorN.O.30A/250V~50/60Hz 
·Output relay for lighitingN.O.30A/250V~50/60Hz
·Temperature sensorNTC,1 sensorRoom-temp. display 
·Temperature unit/Change ·Resolution1
·Accuracy±1±2 
·Range of temperature control-45 ~ 45-40 ~ 120
·Panel dimension78×35×37mm
·Mounting hole dimension71×29mm
Parameter
Function
Set range
Default
PA
Menu password
00 ~ 99
00
E1
Lower set point limit
-45 ~ Set temperature
-20
-40 ~ Set temperature
-05
E2
Higher set point limit
Set temperature ~ 45
20
Set temperature ~ 120
68
E3
Temperature hysteresis
01 ~ 10
05
01 ~ 36
07
E4
Comp. Start delay time
00 ~ 10Min
00
E5
Offset on room temp.
-05 ~ 05/
00
C1
Temperature unit
00=
00
01=
CPA
Changing menu password
00 ~ 99Setting00, the menu password is cancelled
00
Notes:
·The parameter can be changed only after the correct PA to be entered, or it can only be checked, except temperature controlling.
·It means locking cancelled if PA is set 00, no password required for checking and/or changing.
 
 
 
Digital controllers purchased from us should always be diagnosed and installed by a suitably qualified person, if incorrectly installed they will suffer irrepairable damage, for this reason WE CANNOT OFFER ANY WARRANTY on this type of part.