Digital Controller DIXELL XR40CX-5N1C1
Model XR40CX, format 32 x 74 mm, is microprocessor based controller, suitable for applications on
medium or low temperature refrigerating units. It has 2 relay outputs to control compressor and
defrost, which can be either electrical or reverse cycle (hot gas). It is also provided with three NTC or
PTC probe inputs, the first one for temperature control, the second one, to be located onto the
evaporator, to control the defrost termination temperature, the third one, optional, to connect to the
HOT KEY terminals to signal the condenser temperature alarm or to display a temperature. The
digital input can operate as fourth temperature probe.
The HOT KEY output allows to connect the unit, by means of the external module XJ485-CX, to a
network line ModBUS-RTU compatible such as the dIXEL monitoring units of X-WEB family. It
allows to program the controller by means the HOT KEY programming keyboard.
The instrument is fully configurable through special parameters that can be easily programmed
through the keyboard.
- Low Temperature
- Probe Inputs: 3 NTC / PTC Probes (1 Thermostat, 1 Condenser, 1 Defrost)
- Digital Input: 1 Configurable (for Alarm, Start Defrost, Aux, Door Switch, or Pressure Switch)
- Relay Outputs: 2 (1 Compressor (8A, 20A optional), 1 Defrost (8A))
- Power Supply: 240 VAC
Digital controllers purchased from us should always be diagnosed and installed by a suitably qualified person, if incorrectly installed they will suffer irrepairable damage, for this reason WE CANNOT OFFER ANY WARRANTY on this type of part.